留言板

尊敬的读者、作者、审稿人, 关于本刊的投稿、审稿、编辑和出版的任何问题, 您可以本页添加留言。我们将尽快给您答复。谢谢您的支持!

姓名
邮箱
手机号码
标题
留言内容
验证码

Methanol conversion to DME as a blue fuel: The beneficial use of ultrasonic irradiation for the preparation of CuO/H-MOR nanocatalyst

Sameh M. K. Aboul-Fotouh

downloadPDF
文章导航 > 燃料化学学报（中英文）  > 2014 >  42(11): 1340-1350
Sameh M. K. Aboul-Fotouh. Methanol conversion to DME as a blue fuel: The beneficial use of ultrasonic irradiation for the preparation of CuO/H-MOR nanocatalyst[J]. 燃料化学学报（中英文）, 2014, 42(11): 1340-1350.
引用本文: Sameh M. K. Aboul-Fotouh. Methanol conversion to DME as a blue fuel: The beneficial use of ultrasonic irradiation for the preparation of CuO/H-MOR nanocatalyst[J]. 燃料化学学报（中英文）, 2014, 42(11): 1340-1350.
shu
Sameh M. K. Aboul-Fotouh. Methanol conversion to DME as a blue fuel: The beneficial use of ultrasonic irradiation for the preparation of CuO/H-MOR nanocatalyst[J]. Journal of Fuel Chemistry and Technology, 2014, 42(11): 1340-1350.
Citation: Sameh M. K. Aboul-Fotouh. Methanol conversion to DME as a blue fuel: The beneficial use of ultrasonic irradiation for the preparation of CuO/H-MOR nanocatalyst[J]. Journal of Fuel Chemistry and Technology, 2014, 42(11): 1340-1350.
shu

Methanol conversion to DME as a blue fuel: The beneficial use of ultrasonic irradiation for the preparation of CuO/H-MOR nanocatalyst

  • Ain Shams University, Faculty of Education, Chemistry Department, Roxy, Cairo 11566, Egypt

详细信息
    通讯作者:

    Sameh M. K. Aboul-Fotouh, samehaboulfotouh@yahoo.com

  • 中图分类号: O643.3

Methanol conversion to DME as a blue fuel: The beneficial use of ultrasonic irradiation for the preparation of CuO/H-MOR nanocatalyst

  • Ain Shams University, Faculty of Education, Chemistry Department, Roxy, Cairo 11566, Egypt

    摘要
  • 摘要: Methanol conversion to DME was investigated over CuO/H-MOR nanocatalyst prepared by precipitation and/or by precipitation flowed by ultrasonic irradiation methods. BET, XRD, SEM, NH3-TPD and H2-TPR techniques were used to characterize nanocatalysts. The effective ultrasonication factors encountered during carrying out the dehydration of methanol on Cuo/H-MOR zeolite catalysts to produce dimethylether are studied in the present work. These factors include: the type of ultrasonication media, the ultrasonication time, and the fixed weight of the solid catalyst per the volume of the ultrasonication liquid media (Wcatalyst/Vliquid ratio). XRD showed that structure of H-MOR is not damaged even after it is loaded with CuO nanoparticles or with ultrasonication. H2-TPR profiles indicated that reducibility of sonicated CuO/H-MOR nanocatalyst is higher than non-sonicated catalyst. It is found that employing ultrasound energy for 60 min has the highest influence on the surface properties of nanocatalyst and its catalytic performance (activity and stability) of CuO/H-MOR catalyst. Surface morphology (SEM) of the sonicated CuO/H-MOR catalysts have clarified that methanol by itself used as an ultrasonication medium gives the best results concerning the homogeneity of particle sizes compared to the non-sonicated catalyst, where large agglomerates and non-homogeneous clusters appeared. Water used as a sonication medium showed many large agglomerates in addition to some smaller particles resulted in low catalytic activity. The different alcohols and (Wcatalyst/Vliquid) ratio were examined to give precise correlation with the catalytic activity of the sonicated CuO/H-MOR zeolite catalyst. These findings certified that ultrasonication has a deep effect on the surface morphology and hence on the catalytic behavior of the dehydration of methanol to DME. NH3-TPD shows that ultrasound irradiation has enhanced the acidity of CuO/H-MOR catalyst and hence it's catalytic performance for DME formation.
    Abstract: Methanol conversion to DME was investigated over CuO/H-MOR nanocatalyst prepared by precipitation and/or by precipitation flowed by ultrasonic irradiation methods. BET, XRD, SEM, NH3-TPD and H2-TPR techniques were used to characterize nanocatalysts. The effective ultrasonication factors encountered during carrying out the dehydration of methanol on Cuo/H-MOR zeolite catalysts to produce dimethylether are studied in the present work. These factors include: the type of ultrasonication media, the ultrasonication time, and the fixed weight of the solid catalyst per the volume of the ultrasonication liquid media (Wcatalyst/Vliquid ratio). XRD showed that structure of H-MOR is not damaged even after it is loaded with CuO nanoparticles or with ultrasonication. H2-TPR profiles indicated that reducibility of sonicated CuO/H-MOR nanocatalyst is higher than non-sonicated catalyst. It is found that employing ultrasound energy for 60 min has the highest influence on the surface properties of nanocatalyst and its catalytic performance (activity and stability) of CuO/H-MOR catalyst. Surface morphology (SEM) of the sonicated CuO/H-MOR catalysts have clarified that methanol by itself used as an ultrasonication medium gives the best results concerning the homogeneity of particle sizes compared to the non-sonicated catalyst, where large agglomerates and non-homogeneous clusters appeared. Water used as a sonication medium showed many large agglomerates in addition to some smaller particles resulted in low catalytic activity. The different alcohols and (Wcatalyst/Vliquid) ratio were examined to give precise correlation with the catalytic activity of the sonicated CuO/H-MOR zeolite catalyst. These findings certified that ultrasonication has a deep effect on the surface morphology and hence on the catalytic behavior of the dehydration of methanol to DME. NH3-TPD shows that ultrasound irradiation has enhanced the acidity of CuO/H-MOR catalyst and hence it's catalytic performance for DME formation.
    • HTML全文
    • 参考文献(48)
  • PADDOCK C. Diesel exhaust fumes cause cancer[Z]. WHO, Medical News Today, 2012.
    YARIPOUR F, BAGHAEI F, SCHMIDT I, PERREGAARD J. Catalytic dehydration of methanol to dimethyl ether(DME) over solid-acid catalysts[J]. Catal Commun, 2005, 6(2): 147-152.
    ZHU Z, LI D K, LIU J, WEI Y J, LIU S H. Investigation on the regulated and unregulated emissions of a DME engine under different injection timing[J]. Appl Therm Eng, 2012, 35: 9-14.
    LADERA R, FINOCCHIO E, ROJAS S, FIERRO J L G, M. OJEDA M. Supported niobium catalysts for methanol dehydration to dimethyl ether: FTIR studies of acid properties[J]. Catal Today, 2012, 192(1): 136-143.
    TANG Q, XU H, ZHENG Y, WANG J, LI H, ZHANG J. Catalytic dehydration of methanol to dimethyl ether over micro-mesoporous ZSM-5/MCM-41composite molecular sieves[J]. Appl Catal A: Gen, 2012, 413-414: 36-42.
    KESHAVARZ A R, REZAEI M, YARIPOUR F. Preparation of nanocrystalline [WTBZ]γ[WTB1]-Al2O3 catalyst using different procedures for methanol dehydration to dimethyl ether[J]. J Natural Gas Chem, 2011, 20(3): 334-338.
    RAOOF F, TAGHIZADEH M, ELIASSI A, YARIPOUR F. Effects of temperature and feed composition on catalytic dehydration of methanol to dimethyl ether over [WTBZ]γ[WTB1]-alumina[J]. Fuel, 2008, 87(13/14): 2967-2971.
    KHOM-IN J, PRASERTHDAM P, PANPRANOT J, MEKASUWANDUMRONG O. Dehydration of methanol to dimethyl ether over nanocrystalline Al2O3 with mixed [WTBZ]γ[WTB1]-and [WTBZ]χ[WTB1]-crystalline phases[J]. Catal Commun, 2008, 9(10): 1955-1958.
    MOLLAVALI M, YARIPOUR F, MOHAMMADI-JAM S, ATASHI H. Relationship between surface acidity and activity of solid-acid catalysts in vapor phase dehydration of methanol[J]. Fuel Process Technol, 2009, 90(9): 1093-1098.
    EBEID M F, ALI A, AMIN A, ABOUL-FOTOUH S. Heteropoly acids supported on [WTBZ]α[WTB1]-Al2O3 as solid acid catalysts for methanol transformation[J]. Collect Czech Chem Commun, 1993, 58: 2079-2089.
    AMIN A, ALI A, ABOUL-FOTOUH S, EBEID E F. Surface studies and nature of active sites of supported heteropolyacids as catalysts in methanol dehydration[J]. Collect Czech Chem Commun, 1994, 59: 820-832.
    LIU D, YAO C, ZHANG J, FANG D, CHEN D. Catalytic dehydration of methanol to dimethyl ether over modified [WTBZ]γ[WTB1]-Al2O3 catalyst[J]. Fuel, 2011, 90(5): 1738-1742.
    JIANG S, HWANG J, JIN T, CAI T, CHO W, BAEK Y, PARK S. Dehydration of methanol to dimethyl ether over ZSM-5 Zeolite[J]. Bull Korean Chem Soc, 2004, 25: 185-189.
    SUN KOU M R, MENDIOROZ S, SALERNO P, MUNOZ V. Catalytic activity of pillared clays in methanol conversion[J]. Appl Catal A: Gen, 2003, 240(1/2): 273-285.
    LERTJIAMRATN K, PRASERTHDAM P, ARAI M, PANPRANOT J. Modification of acid properties and catalytic properties of AlPO4 by hydrothermal pretreatment for methanol dehydration to dimethyl ether[J]. Appl Catal A: Gen, 2010, 378(1): 119-123.
    YARIPOUR F, BAGHAEI F, SCHMIDT I, PERREGAARD J. Synthesis of dimethyl ether from methanol over aluminium phosphate and silica-titania catalysts[J]. Catal Commun, 2005, 6(8): 542-549.
    FEI J, HOU Z, ZHU B, LOU H, ZHENG X. Synthesis of dimethyl ether(DME) on modified HY zeolite and modified HY zeolite-supported Cu-Mn-Zn catalysts[J]. Appl Catal A: Gen, 2006, 304: 49-54.
    FU Y, HONG T, CHEN J, AUROUX A, SHEN J. Surface acidity and the dehydration of methanol to dimethyl ether[J]. Thermochim Acta, 2005, 434(1/2): 22-26.
    KHANDANN, KAZEMEINI M, AGHAZIARATI M.Determining an optimum catalyst for liquid-phase dehydration of methanol to dimethyl ether[J]. Appl Catal A: Gen, 2008, 349(1/2): 6-12.
    RAMOS F S, FARIAS A M D, BORGES L E P, MONTEIRO J L, FRAGA M A, SOUSA-AGUIAR E F, APPEL L G. Role of dehydration catalyst acid properties on one-step DME synthesis over physical mixtures[J]. Catal Today, 2005, 101(1): 39-44.
    XU M, LUNSFORD J H, GOODMAN D W, BHATTACHARYYA A. Synthesis of dimethyl ether(DME) from methanol over solid-acid catalysts[J]. Appl Catal A: Gen, 1997, 149(2): 289-301.
    WANG A W, WEIGEL S, G. MURARO G. Molecular sieves as catalysts for methanol dehydration in the LPDME-process[R]. Air Products and Chemicals Inc., DE-FC22-95 PC93052, 2002-04-01.
    KIM S D, BAEK S C, LEE Y J, JUN K W, KIM M J, YOO I S. Effect of gamma-alumina content on catalytic performance of modified ZSM-5 for dehydration of crude methanol to dimethyl ether[J]. Appl Catal A: Gen, 2006, 309(1): 139-143.
    ABOUL-GHEIT A K, ABOUL-FOTOUH S M. Insight in cyclohexene hydroconversion process using catalysts containing 0.35% Pton amorphous and zeolite supports[J]. J Taiwan Inst Chem Eng, 2012, 43(5): 711-717.
    ABOUL-FOTOUH S M. Cyclohexene reactivity using catalysts containingPt, Re and PtRe supported on Na- and H- mordenite[J]. J Chin Chem Soc, 2003, 50(6): 1151-1158.
    ABOUL-FOTOUH S M K,HASSAN M M I. Conversion of methanol on CuO/ H-MOR and CuO/ H-ZSM-5 catalysts[J]. Acta Chim Solv, 2010, 57(4): 872-879.
    KHANDAN N, KAZEMEINI M, AGHAZIARATI M. Synthesis of dimethyl ether over modified H-mordenitezeolites and bifunctionalcatalysts composed of Cu/ZnO/ZrO2 and modified H-mordenitezeolite in slurry phase[J]. Catal Lett, 2009, 129(1/2): 111-118.
    ABOUL-FOTOUH S M K, Aboul-Gheit N A K, HASSAN M M I. Conversion of methanol using modified H-MOR zeolite catalysts[J]. Chin J Catal, 2011, 32(3/4): 412-417.
    KUMAR N, MASLOBOISCHIKOVA O V, KUSTOV L M, HEIKKILA T, SALMI T, MURZIN D Y. Synthesis of Pt modified ZSM-5 and beta zeolite catalysts: Influence of ultrasonic irradiation and preparation methods on physico-chemical and catalytic properties in pentane isomerization[J]. Ultrason Sonochem, 2007, 14(2): 122-130.
    ZHANG H, ZHU L Q, LI W P, LIU H C. Sonochemicalfabrication and electrochemical performance of electrode materials containing rare earth yttrium[J]. Acta Phys-Chim Sin, 2008, 24(8): 1425-1431.
    BONRATH W. Ultrasound supported catalysis[J]. Ultrason Sonochem, 2005, 12(1/2): 103-106.
    SIMONA B, ANTONELLA G. Preparation of highly dispersed CuO catalysts on oxide supports for de-NOx reactions[J]. Ultrason Sonochem, 2003, 10(2): 61-64.
    DANTSIN G, SUSLICK K S. Sonochemical preparation of a nanostructured bifunctional catalyst[J]. J Am Chem Soc, 2000, 122: 5214-5215.
    ABOUL-FOTOUH S M K. Effect of ultrasonic irradiation and/or halogenation on the catalytic performance of [WTBZ]γ[WTB1]-Al2O3 for methanol dehydration to dimethyl ether[J]. J Fuel Chem Technol, 2013, 41(9): 1077-1084.
    ABOUL-FOTOUH S M K. Production of dimethylether(DME) as a clean fuelusing sonochemicallyprepared CuO and/or ZnO-modified [WTBZ]γ[WTB1]-alumina catalysts[J]. J Fuel Chem Technol, 2014, 42(3): 350-356.
    FREEL J. Chemisorption on supported platinum: I. Evaluation of a pulse method[J]. J Catal, 1972, 25(1): 139-148.
    LII J L, INUI T. Enhancement in methanol synthesis activity of a copper/zinc/aluminum oxide catalyst by ultrasonic treatment during the course of the preparation procedure[J]. Appl Catal A: Gen, 1996, 139(1/2): 87-96.
    NASIKIN M, A. WAHID A. Effect of ultrasonic during preparation on Cu-based catalyst performance for hydrogenation of CO, to methanol[J]. AJChE, 2005, 5(2): 111-115.
    CAMPBELL S M, JIANG X Z, HOWE R F. Methanol to hydrocarbons: Spectroscopic studies and the significance of extra-framework aluminum[J]. Microporous Mesoporous Mater, 1999, 29(1/2): 91-108.
    LIU P, REN T, SUN Y H. Influence of template on Si distribution of SAPO-11 and their performance for n-paraffin isomerization[J]. Microporous Mesoporous Mater, 2008, 114(1/3): 365-372.
    VENUGOPAL A, PALGUNADI J, DEOG J K, JOO O S, SHIN C H. Dimethyl ether synthesis on the admixed catalysts of Cu-Zn-Al-M(M=Ga, La, Y, Zr) and[gamma]-Al2O3: The role of modifier[J]. J Mol Catal A: Chem, 2009, 302(1/2): 20-27.
    FEI J H, TANG X Y, HUO Z Y, LOU H, ZHENG X M. Effect of copper content on Cu-Mn-Zn/zeolite-Y catalysts for the synthesis of dimethyl ether from syngas[J]. Catal Commun, 2006, 7(11): 827-831.
    ZHAO Y, CHEN J, ZHANG J. Effects of ZrO2 on the performance of CuO-ZnO-Al2O3/HZSM-5 catalyst for dimethyl ether synthesis from CO2 hydrogenation[J]. J Nat Gas Chem, 2007, 16(4): 389-392.
    KHOSHBIN R, HAGHIGHI M. Direct syngas to DME as a clean fuel: The beneficial use ofultrasound for the preparation of CuO-ZnO-Al2O3/HZSM-5 nanocatalyst[J]. Chem Eng Res Des, 2013, 91(6): 1111-1122.
    SOLYMAN S M, ABOUL-GHEIT N A K, TAWFI F M, SADEK M, AHMED H A. Performance of ultrasonic-Treatednano-zeolites employed in the preparation of dimethyl ether[J]. Egyp J Petro, 2013, 22(1): 91-99.
    BANDIERA J, NACCACHE C. Kinetics of methanol dehydration on dealuminated H-mordenite: Model with acid and basic active centers[J]. Appl Catal A: Gen, 1991, 69: 139-148.
    NUNES M H O, SILVA V T, SCHMAL M. The influence of the acid sites on the methylamines synthesis with Cu-HZSM-5 zeolite[J]. Catal Lett, 2004, 97(1/2): 1-8.
    MOCHIDA I, YASUTAKE A, FUJITSU H. Selective synthesis of dimethylamine(DMA) from methanol and ammonia over zeolites[J]. J Catal, 1983, 82(2): 313-321.
    • 相关文章
    • 施引文献
  • 资源附件(0)
  • 加载中
WeChat 点击查看大图
计量
  • 文章访问数:  681
  • HTML全文浏览量:  15
  • PDF下载量:  832
  • 被引次数: 0
出版历程
  • 收稿日期:  2014-07-14
  • 修回日期:  2014-10-04
  • 刊出日期:  2014-11-30

目录

    /

    返回文章
    返回
    友情链接： 新型炭材料 中国科学院 中国知网 万方论文查重系统

    主办单位：中国科学院山西煤炭化学研究所 中国化学会主编：房倚天

    电子邮件：rlhx@sxicc.ac.cn

    版权所有 © 《燃料化学学报（中英文）》编辑部 本系统由 北京仁和汇智信息技术有限公司 开发    百度统计

    x 关闭 永久关闭

    2023年《燃料化学学报（中英文）》评优结果公布！