Citation: | GU Jing, CHENG Lei-lei, WANG Ya-zhuo, ZHANG Yuan-xiang, YUAN Hao-ran. High-pressure pyrolysis and its mechanism of polyethylene[J]. Journal of Fuel Chemistry and Technology, 2021, 49(3): 395-406. doi: 10.19906/j.cnki.JFCT.2021028 |
[1] |
汪刚, 余广炜, 谢胜禹, 江汝清, 汪印. 添加不同塑料与污泥混合热解对生物炭中重金属的影响[J]. 燃料化学学报,2019,47(5):611−620. doi: 10.3969/j.issn.0253-2409.2019.05.013
WANG Gang, YU Guang-wei, XIE Sheng-yu, JIANG Ru-qing, WANG Yin. Effect of co-pyrolysis of different plastics with sewage sludge on heavy metals in the biochar[J]. J Fuel Chem Technol,2019,47(5):611−620. doi: 10.3969/j.issn.0253-2409.2019.05.013
|
[2] |
GEYER R, JAMBECK J R, LAW K L. Production, use, and fate of all plastics ever made[J]. Sci Adv,2017,3(7):5.
|
[3] |
MOHANRAJ C, SENTHILKUMAR T, CHANDRASEKAR M. A review on conversion techniques of liquid fuel from waste plastic materials[J]. Int J Energy Res,2017,41(11):1534−1552. doi: 10.1002/er.3720
|
[4] |
KUMAR A, VON WOLFF N, RAUCH M, ZOU Y-Q, SHMUL G, BEN-DAVID Y, LEITUS G, AVRAM L, MILSTEIN D. Hydrogenative Depolymerization of Nylons[J]. JACS,2020,142(33):14267−14275. doi: 10.1021/jacs.0c05675
|
[5] |
KRATISH Y, LI J, LIU S, GAO Y, MARKS T J. Polyethylene terephthalate deconstruction catalyzed by a carbon-supported single-Site molybdenum-dioxo complex [J]. Angew Chem Int Ed, 2020.
|
[6] |
TENNAKOON A, WU X, PATERSON A L, PATNAIK S, PEI Y, LAPOINTE A M, AMMAL S C, HACKLER R A, HEYDEN A, SLOWING I I, COATES G W, DELFERRO M, PETERS B, HUANG W, SADOW A D, PERRAS F A. Catalytic upcycling of high-density polyethylene via a processive mechanism[J]. Nat Catal, 2020.
|
[7] |
GU F, GUO J F, ZHANG W J, SUMMERS P A, HALL P. From waste plastics to industrial raw materials: A life cycle assessment of mechanical plastic recycling practice based on a real-world case study[J]. Sci Total Environ,2017,601:1192−1207.
|
[8] |
VASILE C, BREBU M A, KARAYILDIRIM T, YANIK J, DARIE H. Feedstock recycling from plastics and thermosets fractions of used computers. II. Pyrolysis oil upgrading[J]. Fuel,2007,86(4):477−485. doi: 10.1016/j.fuel.2006.08.010
|
[9] |
RAGAERT K, DELVA L, VAN GEEM K. Mechanical and chemical recycling of solid plastic waste[J]. Waste Management,2017,69:24−58. doi: 10.1016/j.wasman.2017.07.044
|
[10] |
BAENA-GONZáLEZ J, SANTAMARIA-ECHART A, AGUIRRE J L, GONZÁLEZ S. Chemical recycling of plastic waste: Bitumen, solvents, and polystyrene from pyrolysis oil[J]. Waste Management,2020,118:139−149. doi: 10.1016/j.wasman.2020.08.035
|
[11] |
ACHILIAS D S, ROUPAKIAS C, MEGALOKONOMOS P, LAPPAS A A, ANTONAKOU Ε V. Chemical recycling of plastic wastes made from polyethylene (LDPE and HDPE) and polypropylene (PP)[J]. J Hazard Mater,2007,149(3):536−542. doi: 10.1016/j.jhazmat.2007.06.076
|
[12] |
GRAUSE G. Resource control by a sustainability based currency equivalent[J]. J Clean Prod,2018,200:533−541. doi: 10.1016/j.jclepro.2018.07.297
|
[13] |
孙锴, 王琬丽, 黄群星. 典型杂质掺混对废塑料热解油特性的影响[J]. 化工进展, 2020, 1-11.
SUN Kai, WANG Wan-li, HUANG Qun-xing. Effect of typical impurities on the pyrolysis oil of waste plastics[J]. Chem Ind Eng Pro (China), 2020, 1-11.
|
[14] |
孙艺蕾, 马跃, 李术元, 岳长涛. 聚烯烃塑料的热解和催化热解研究进展[J]. 化工进展, 2020, 1-21.
SUN Yi-lei, MA Yue, LI Shu-yuan, YUE Chang-tao. Research progress in the pyrolysis and catalytic pyrolysis of waste polyolefin plastics[J]. Chem. Ind. & Eng. Pro. (China), 2020, 1-21.
|
[15] |
AL-SALEM S M, ANTELAVA A, CONSTANTINOU A, MANOS G, DUTTA A. A review on thermal and catalytic pyrolysis of plastic solid waste (PSW)[J]. J Environ Manage,2017,197:177−98. doi: 10.1016/j.jenvman.2017.03.084
|
[16] |
WONG S L, NGADI N, ABDULLAH T A T, INUWA I M. Current state and future prospects of plastic waste as source of fuel: A review[J]. Renewable Sustainable Energy Rev,2015,50:1167−80. doi: 10.1016/j.rser.2015.04.063
|
[17] |
MURATA K, SATO K, SAKATA Y. Effect of pressure on thermal degradation of polyethylene[J]. J Anal Appl Pyrolysis, 2004, 71(2): 569-89.
|
[18] |
KUMARI A, KUMAR S. Pyrolytic degradation of polyethylene in autoclave under high pressure to obtain fuel[J]. J Anal Appl Pyrolysis,2017,124:298−302. doi: 10.1016/j.jaap.2017.01.020
|
[19] |
ONWUDILI J A, INSURA N, WILLIAMS P T. Composition of products from the pyrolysis of polyethylene and polystyrene in a closed batch reactor: Effects of temperature and residence time[J]. J Anal Appl Pyrolysis,2009,86(2):293−303. doi: 10.1016/j.jaap.2009.07.008
|
[20] |
CHENG L, GU J, WANG Y, ZHANG J, YUAN H, CHEN Y. Polyethylene high-pressure pyrolysis: Better product distribution and process mechanism analysis[J]. Chem Eng J,2020,385:123866. doi: 10.1016/j.cej.2019.123866
|
[21] |
LOK C M, VAN DOORN J, ARANDA ALMANSA G. Promoted ZSM-5 catalysts for the production of bio-aromatics, a review[J]. Renew Sustainable Energy Rev,2019,113:109248. doi: 10.1016/j.rser.2019.109248
|
[22] |
LÓPEZ A, DE MARCO I, CABALLERO B M, LARESGOITI M F, ADRADOS A. Influence of time and temperature on pyrolysis of plastic wastes in a semi-batch reactor[J]. Chem Eng J,2011,173(1):62−71. doi: 10.1016/j.cej.2011.07.037
|
[23] |
MOSIO-MOSIEWSKI J, WARZALA M, MORAWSKI I, DOBRZANSKI T. High-pressure catalytic and thermal cracking of polyethylene[J]. Fuel Process Technol,2007,88(4):359−364. doi: 10.1016/j.fuproc.2006.10.009
|
[24] |
SANTOS E, RIJO B, LEMOS F, LEMOS M A N D A. A catalytic reactive distillation approach to high density polyethylene pyrolysis – Part 2 – Middle olefin production[J]. Catal Today,2020,.
|
[25] |
AKUBO K, NAHIL M A, WILLIAMS P T. Aromatic fuel oils produced from the pyrolysis-catalysis of polyethylene plastic with metal-impregnated zeolite catalysts[J]. J Energy Inst,2019,92(1):195−202. doi: 10.1016/j.joei.2017.10.009
|
[26] |
SUN K, HUANG Q, CHI Y, YAN J. Effect of ZnCl2-activated biochar on catalytic pyrolysis of mixed waste plastics for producing aromatic-enriched oil[J]. Waste Management,2018,81:128−137. doi: 10.1016/j.wasman.2018.09.054
|
[27] |
SADRAMELI S M. Thermal/catalytic cracking of hydrocarbons for the production of olefins: A state-of-the-art review I: Thermal cracking review[J]. Fuel,2015,140:102−115. doi: 10.1016/j.fuel.2014.09.034
|
[28] |
SERRANO D P, AGUADO J, ESCOLA J M. Developing advanced catalysts for the conversion of polyolefinic waste plastics into fuels and chemicals[J]. ACS Catal,2012,2(9):1924−1941. doi: 10.1021/cs3003403
|
[29] |
李传强, 刘思媛, 王东升, 刘书彬, 郑旭煦, 袁小亚. 压力反应釜中低温热裂解废旧LLDPE塑料制备PE蜡[J]. 化工学报,2019,70(12):4856−4863.
LI Chuan-qiang, LIU Si-yuan, WANG dong-sheng, LIU Shu-bin, ZHENG Xu-xu, YUAN Xiao-ya. Preparation of PE wax by pyrolysis of LLDPE waste plastic in a pressure reactor under low temperature[J]. CIESC J,2019,70(12):4856−4863.
|