Prepartion of phosphotungstic acid functionalized carbon nitride and its catalytic performance in oxidative desulfurization of model oil

LI Xiu-ping; ZHAO Rong-xiang; SU Jian-xun; AI dong

Volume 43 Issue 07

Jul. 2015

Turn off MathJax

Article Contents

Article Navigation > Journal of Fuel Chemistry and Technology > 2015 > 43(07): 870-875

LI Xiu-ping, ZHAO Rong-xiang, SU Jian-xun, AI dong. Prepartion of phosphotungstic acid functionalized carbon nitride and its catalytic performance in oxidative desulfurization of model oil[J]. Journal of Fuel Chemistry and Technology, 2015, 43(07): 870-875.

Citation:

LI Xiu-ping, ZHAO Rong-xiang, SU Jian-xun, AI dong. Prepartion of phosphotungstic acid functionalized carbon nitride and its catalytic performance in oxidative desulfurization of model oil[J]. Journal of Fuel Chemistry and Technology, 2015, 43(07): 870-875.

Citation:

LI Xiu-ping, ZHAO Rong-xiang, SU Jian-xun, AI dong. Prepartion of phosphotungstic acid functionalized carbon nitride and its catalytic performance in oxidative desulfurization of model oil[J]. Journal of Fuel Chemistry and Technology, 2015, 43(07): 870-875.

PDF( 2337 KB)

Prepartion of phosphotungstic acid functionalized carbon nitride and its catalytic performance in oxidative desulfurization of model oil

1.
College of Chemistry & Material Science Engineering, Liaoning University of Petroleum & Chemical Technology, Fushun 113001, China;
2.
College of Petrochemical Engineering, Liaoning University of Petroleum & Chemical Technology, Fushun 113001, China

Received Date: 2015-01-29
Rev Recd Date: 2015-04-08
Publish Date: 2015-07-30

Abstract

Abstract

A new phosphotungstic acid functionalized carbon nitride (g-C₃N₄/HPW) was prepared with carbon nitride and phosphotungstic acid as raw materials. The structure of g-C₃N₄/HPW was characterized by XRD, FT-IR and SEM; with g-C₃N₄/HPW as a catalyst, the oxidative desulfurization of model oil containing dibenzothiophene (DBT) was carried out by using hydrogen peroxide as oxidant and imidazolium tetrafluoroborate ionic liquid as extractant. The influences of reaction temperature, catalyst amount, extractant amount, H₂O₂ amount, type of thiophene on the desulfurization efficiency were investigated. The results indicate that under the optimal reaction conditions, viz., 5 mL model oil, 0.02 g g-C₃N₄/HPW, 1.0 mL H₂O₂, 1.5 mL BF₄, 70 ℃ and reaction time of 120 min, the desulfurization efficiency reaches 93%. Moreover, there is no significant decrease in the desulfurization activity after the catalyst system was recycled for 4 cycles.
- g-C₃N₄,
- phosphotungstic acid,
- dibenzothiophene,
- desulfurization

FullText(HTML)

References(23)

References

张存, 王洪娟, 刘涛, 刘晓勤. 模拟油品氧化脱硫及反应动力学研究[J]. 燃料化学学报, 2011, 39(8): 611-614. (ZHANG Cun, WANG Hong-juan, LIU Tao, LIU Xiao-qin. Simulated oil dibenzothiophene solid superacid oxidative desulfurization oxidation kinetics[J]. J Fuel Chem Technol, 2011, 39(8): 611-614.)

KULKARNI P S, AFONSO C A M. Deep desulfurization of diesel fuel using ionic liquids: Current status and future challenges[J]. Green Chem, 2010, 12(7): 1139-1149.

SRIVASTAVAV C. An evaluation of desulfurization technologies for sulfur removal from liquid fuels[J]. RSC Adv, 2012, 2(3): 759-783.

SHU C H, SUN T H, GUO Q B, JIA J P, LOU Z Y. Desulfurization of diesel fuel with nickel boride in situ generated in an ionic liquid[J]. Green Chem, 2014, 16(8): 3881-3889.

LI C, JIANG Z X, GAO J B, YANG Y X, WANG S J, TIAN F P, SUN F X, SUN X P, YING P L, HAN C R. Ultra-deep desulfurization of diesel: Oxidation with a recoverable catalyst assembled in emulsion[J]. Chem Eur J, 2004, 10(9): 2277-2280.

KOMINTARACHAT C, TRAKARNPRUK W. Oxidative desulfurization using polyoxometalates[J]. Ind Eng Chem Res, 2006, 45(6): 1853-1856.

ZHANG S, ZHANG Q. ZHANG Z C. Extractive desulphurization and denitrogenation of fuels using ionic liquids[J]. Ind Eng Chem Res, 2004, 43(2): 614-622.

张金水, 王博, 王心晨. 石墨相氮化碳的合成及应用[J]. 物理化学学报, 2013, 29(9): 1865-1876. (ZHANG Jin-shui, WANG Bo, WANG Xin-chen. Chemical synthesis and applications of graphitic carbon nitride[J]. Acta Phys Chim Sin, 2013, 29(9): 1865-1876.)

张海燕, 代跃利, 蔡蕾. 杂多酸催化剂催化氧化脱硫研究进展[J]. 化工进展, 2013, 32(4): 809-814. (ZHANG Hai-yan, DAI Yue-li, CAI Lei. Research progress of heteropoly acid catalyzed oxidative desulfurization[J]. Chem Ind Eng Prog, 2013, 32(4): 809-814.)

COLLINS F M, LUCY A R, SHARP C. Oxidative desulphurisation of oils via hydrogen peroxide and heteropolyanion catalysis[J]. J Mol Catal A: Chem, 1997, 117(1/3): 397-403.

YAZU K, YAMAMOTOY, FURUYAT, MIKI K, UKEGAWA K. Oxidation of dibenzothiophenes in an organic biphasic system and its application to oxidative desulfurization of light oil[J]. Energy Fuels, 2001, 15(6): 1535-1536.

YAZU K, FURUYA T, MIKI K, UKEGAWA K. Tungstophosphoric acid-catalyzed oxidative desulfurization of light oil with hydrogen peroxide in a light oil/acetic acid biphasic system[J]. Chem Lett, 2003, 32(10): 920-921.

刘日嘉, 王睿. 氨基化中空SiO₂杂多化合物复合型催化剂的合成、表征及催化燃油深度脱硫性能[J].高等学校化学学报, 2013, 34(12): 2814-2820. (LIU Ri-jia, WANG Rui. Synthesis, characterization and catalytic fuel ultra-deep desulfurization of hollow amino-SiO₂supported heteropoly compound catalyst[J]. Chem J Chin Univ, 2013, 34(12): 2814-2820.)

LUO G Q, KANG L H, ZHU M Y, DAI B. Highly active phosphotungstic acid immobilized on amino functionalized MCM-41 for the oxidesulfurization of dibenzothiophene[J]. Fuel Process Technol, 2014, 118: 20-27.

张金水, 王博, 王心晨. 石墨相氮化碳的化学合成及应用[J]. 物理化学学报, 2013, 29(9): 1865-1876. (ZHANG Jin-shui, WANG Bo, WANG Xin-chen. Chemical synthesis and applications of graphitic carbon nitride[J]. Acta Phys Chim Sin, 2013, 29(9): 1865-1876.)

金瑞瑞, 游继光, 张倩, 刘丹, 胡绍争, 桂建舟. Fe掺杂g-C₃N₄的制备及其可见光催化性能[J].物理化学学报, 2014, 30(9): 1706-1712. (JIN Rui-rui, YOU Ji-guang, ZHANG Qian, LIU Dan, HU Shao-zheng, GUI Jian-zhou. Preparation of Fe-doped graphitic carbon nitride with enhanced visible-light photocatalytic activity[J]. Acta Phys Chim Sin, 2014, 30(9): 1706-1712.

李佳慧, 胡嘉, 赵荣祥, 李秀萍. 氨基酸功能化磷钨酸盐的制备及其催化氧化脱硫性能[J]. 燃料化学学报, 2014, 42(11): 1394-1399. (LI Jia-hui, HU Jia, ZHAO Rong-xiang, LI Xiu-ping. Prepartion of amino acid functionalized heteropolyacid salt and its catalytic performance for oxidation desulfurization of model oil[J]. J Fuel Chem Technol, 2014, 42(11): 1394-1399.

DAI K, LU L H, LIU Q, ZHU G P, WEI X Q, BAI J, XUAN L L, WANG H. Sonication assisted preparation of graphene oxide/graphitic-C₃N₄nanosheet hybrid with reinforced photocurrent for photocatalyst applications[J]. Dalton Trans, 2014, 43(17): 6295-6299.

KUMAR S, SURENDAR T, KUMAR B, BARUAHB A, SHANKER V. Synthesis of highly efficient and recyclable visiblelight responsive mesoporous g-C₃N₄ photocatalyst via facile template-free sonochemical route[J]. RSC Adv, 2014, 4(16): 8132-8137.

陈兰菊, 赵地顺, 郭绍辉. 改性氧化铝负载氧化物催化氧化噻吩的脱硫研究[J].化学学报, 2007, 65(16): 1718-1722. (CHEN Lan-ju, ZHAO Di-shun, GUO Shao-hui. Oxidative desuifurization of thiophene over modified alumina loading oxide[J]. Acta Chim Sinica, 2007, 65(16): 1718-1722.)

刘日嘉, 王睿, VLADIMIR K. Keggin结构杂多酸盐的合成、表征及催化燃油超深度脱硫[J]. 无机化学学报, 2014, 30(3): 563-572. (LIU Ri-jia, WANG Rui, VLADIMIR K. Synthesis, characterization and catalytic fuel ultra-deep desulfurization of keggin-type polyoxometalates[J]. Chin J Inorg Chem, 2014, 30(3): 563-572.)

李宇慧, 冯丽娟, 王景刚, 周旋, 程斌斌, 王晓燕, 李春虎. MoO₃/介孔Al₂O₃催化氧化脱除模拟油中的硫[J].高等学校化学学报, 2011, 32(3): 778-782. (LI Yu-hui, FENG Li-juan, WANG Jing-gang, ZHOU Xuan, CHENG Bin-bin, WANG Xiao-yan, LI Chu-hu. Catalytic oxidative desulfurization of model oil by MoO₃/mesoporous Al₂O₃[J].Chem J Chin Univ, 2011, 32(3): 778-782.)

张薇, 丁永萍, 宫摇敬, 宋溪明. 羧基功能化离子液体催化二苯并噻吩氧化脱硫[J]. 燃料化学学报, 2012, 5(40): 628-632. (ZHANG Wei, DING Yong-ping, GONG Yao-jing, SONG Xi-ming. Oxidative desulfurization of dibenzothiophene catalysed by carboxylfunctionalized ionic liquid CMMIMBF₄[J]. J Fuel Chem Technol, 2012, 5(40): 628-632.)

Relative Articles

Supplements(0)

Cited By

Proportional views