Volume 43 Issue 10
Oct.  2015
Turn off MathJax
Article Contents
SUN Kai, ZHANG Xiao-yu, ZHANG Lin, BIAN Zhong-kai, HUANG Wei, ZHAO Zhi-huan. Influence of acid and alkaline silica sol on the performance of Cu/Zn/Al slurry catalysts[J]. Journal of Fuel Chemistry and Technology, 2015, 43(10): 1221-1229.
Citation: SUN Kai, ZHANG Xiao-yu, ZHANG Lin, BIAN Zhong-kai, HUANG Wei, ZHAO Zhi-huan. Influence of acid and alkaline silica sol on the performance of Cu/Zn/Al slurry catalysts[J]. Journal of Fuel Chemistry and Technology, 2015, 43(10): 1221-1229.

Influence of acid and alkaline silica sol on the performance of Cu/Zn/Al slurry catalysts

Funds:  The project was supported by the National Natural Science Foundation of China(21336006), General Program of National Natural Science Foundation of China (21176176), and Research Fund for the Doctoral Program of Higher Education of China(20111402130002).
  • Received Date: 2015-05-28
  • Rev Recd Date: 2015-07-19
  • Publish Date: 2015-10-31
  • A series of Cu/Zn/Al/Si slurry catalysts were prepared by the complete liquid-phase technology with acid and alkaline silica sol in the paper. The catalysts are characterized by means of XRD, H2-TPR, FT-IR, BET, NH3-TPD, XPS and TEM. When the acid silica sol is added, which has the similar environment with the process of precursor preparation, the conversion of CO and selectivity of dimethyl ether reach maxiumum, being 65.38% and 76.26% respectively. The acid silica sol weakens the force between Cu and other components, resulting in the Cu component is easy to be reduced and more active lattice planes of Cu0 on the catalyst are exposed. The acid/alkaline properties of silica sol influence acid site strength and the number of acid sites of catalysts and make both strong acidic sites and the weak acidic sites migrate to lower temperature position. In DME synthesis reaction, it is found that the acid silica sol can increase the ratio of the weak acidic sites to the strong acidic sites on the catalysts, which promotes dehydration performance of methanol and the selectivity of DME. In addition, the catalysts with large specific surface area and mesoporous pore structure are favorable for the activity and selectivity of DME.
  • loading
  • SAN X G, ZHANG Y, SHEN W J, TSUBAKI N. New synthesis method of ethanol from dimethyl ether with a synergic effect between the zeolite catalyst and metallic catalyst[J]. Energy Fuels, 2009, 23(5): 2843-2844.
    胡益之, 李洪晋, 韩冬青. 21世纪洁净燃料—二甲醚[J]. 煤化工, 2006, 34(5): 10-14. (HU Yi-zhi, LI Hong-jin, HAN Dong-qing. Dimethyl ether-the clean fuel in the 21st century[J]. Coal Chem Ind, 2006, 34(5): 10-14.)
    CAI G Y, LIU Z M, SHI R M, HE C Q, YANG L X, SUN C L, CHANG Y J. Light alkenes from syngas via dimethyl ether[J]. Appl Catal A: Gen, 1995, 125(1): 29-38.
    VENUGOPAL A, PALGUNADI J, DEOG J K, JOO O S, SHIN C H. Dimethyl ether synthesis on the admixed catalysts of Cu-Zn-Al-M (M= Ga, La, Y, Zr) and γ-Al2O3: The role of modifier[J]. J Mol Catal A: Chem, 2009, 302(1): 20-27.
    ADACHI Y, KOMOTO M, WATANABE I, OHNO Y, FUJIMOTO K. Effective utilization of remote coal through dimethyl ether synthesis[J]. Fuel, 2000, 79(3/4): 229-234.
    PENG X D, TOSELAND B A, TIJM P J A. Kinetic understanding of the chemical synergy under LPDME conditions—once-through applications[J]. Chem Eng Sci, 1999, 54(13/14): 2787-2792.
    赵宁, 陈小平, 任杰, 孙予罕. 浆态床合成二甲醚反应工艺条件的研究[J]. 天然气化工, 2000, 25(3): 1-5. (ZHAO Ning, CHEN Xiao-ping, REN Jie, SUN Yu-han. Effect of operation parameters on dimethyl ether synthesis in slurry bed[J]. Nat Gas Chem Ind, 2000, 25(3): 1-5.)
    TAN Y S, XIE H J, CUI H T, HAN Y Z, ZHONG B. Modification of Cu-based methanol synthesis catalyst for dimethyl ether synthesis from syngas in slurry phase[J]. Catal Today, 2005, 104(1): 25-29.
    ZENG C Y, SUN J, YANG G H, OOKI I, HAYASHI K, YONEYAMA Y, TAGUCHI A, ABE T, TSUBAKI N. Highly selective and multifunctional Cu/ZnO/zeolite catalyst for one-step dimethyl ether synthesis: Preparing catalyst by bimetallic physical sputtering[J]. Fuel, 2013, 112: 140-144.
    MORADI G R, NOSRATI S, YARIPOR F. Effect of the hybrid catalysts preparation method upon direct synthesis of dimethyl ether from synthesis gas[J]. Catal Commun, 2007, 8(3): 598-606.
    AHMAD R, SCHREMPP D, BEHRENS S, SAUER J, DORING M, ARNOLD U. Zeolite-based bifunctional catalysts for the single step synthesis of dimethyl ether from CO-rich synthesis gas[J]. Fuel Process Technol, 2014, 121(1): 38-46.
    PRASAD P S S, BAE J W, KANG S H, LEE Y J, JUN K W. Single-step synthesis of DME from syngas on Cu-ZnO-Al2O3/zeolite bifunctional catalysts: The superiority of ferrierite over the other zeolites[J]. Fuel Process Technol, 2008, 89(12): 1281-1286.
    MORADI G R, NOSRATI S, YARIPOR F. Effect of the hybrid catalysts preparation method upon direct synthesis of dimethyl ether from synthesis gas[J]. Catal Commun, 2007, 8(3): 598-606.
    黄伟, 高志华, 郝利峰, 阴丽华, 谢克昌. 浆态床催化剂及制备方法: 中国, 1314491C[P]. 2007-05-09. (HUANG Wei, GAO Zhi-hua, HAO Li-fen, Yin Li-hua, XIE Ke-chang. The liquid phase preparation technology of catalyst used in slurry reactor: CN, 1314491C[P]. 2007-05-09.)
    樊金串, 吴慧, 黄伟, 石宇, 谢克昌. 完全液相法制备中原料配比对二甲醚合成催化剂结构和性能的影响[J]. 催化学报, 2007, 28(12): 1062-1066. (FAN Jin-chuan, WU Hui, HUANG Wei, SHI Yu, XIE Ke-chang. Effect of composition of raw materials on structure and dimethyl ether synthesis activity of Cu-Zn-Al catalyst prepared by complete liquid phase method[J]. Chin J Catal, 2007, 28(12): 1062-1066.)
    GAO Z H, HUANG W, YIN L H, XIE K C. Liquid-phase preparation of catalysts used in slurry reactors to synthesize dimethyl ether from syngas: Effect of heat-treatment atmosphere[J]. Fuel Process Technol, 2009, 90(12): 1442-1446.
    高志华, 黄伟, 王将永, 阴丽华, 谢克昌. Cu-Zn-Al-Zr合成二甲醚浆状催化剂的完全液相制备及表征[J].化学学报, 2008, 66(3): 295-300. (GAO Zhi-hua, HUANG Wei, WANG Jiang-yong, YIN Li-hua, XIE Ke-chang. Complete liquid-phase preparation and characterization of Cu-Zn-Al-Zr slurry catalysts for synthesis of dimethyl ether[J]. Acta Chim Sin, 2008, 66(3): 295-300.)
    FAN J C, CHEN C Q, ZHAO J, HUANG W, XIE K C. Effect of surfactant on structure and performance of catalysts for DME synthesis in slurry bed[J]. Fuel Process Technol, 2010, 91(4): 414-418.
    LI Z Z, ZUO Z J, HUANG W, XIE K C. Research on Si-Al based catalysts prepared by complete liquid-phase method for DME synthesis in a slurry reactor[J]. Appl Surf Sci, 2011, 257: 2180-2183.
    唐钰, 黄伟, 韩涛, 孙凯, 王鹏. 完全液相法Cu-Zn-Al-Si催化剂一步合成二甲醚[J]. 应用化学, 2015, 32(1): 76-84. (TANG Yu, HUANG Wei, HAN Tao, SUN Kai, WANG Peng. Performance of Cu-Zn-Al-Si catalyst prepared by a complete liquid-phase technology for dimethyl ether synthesis[J]. Chin J Appl Chem, 2015, 32(1): 76-84.)
    王鹏. 浆态床一步法合成二甲醚催化剂制备工艺的研究[D]. 太原: 太原理工大学, 2013. (WANG Peng. Study on the preparation technology of catalyst for dme synthesis in slurry reactor[D]. Taiyuan: Taiyuan University of Technology, 2013.)
    王鹏, 黄伟, 唐钰, 孙凯, 张小雨.完全液相制备中醇溶剂及醇用量对催化剂性能的影响[J]. 太原理工大学学报, 2013, 44(5): 551-556. (WANG Peng, HUANG Wei, TANG Yu, SUN Kai, ZHANG Xiao-yu. Effect of alcohols and usage amount on performance of catalyst prepared by complete liquid phase technology[J]. J Taiyuan Univ Technol, 2013, 44(5): 551-556.)
    樊金串, 杨瑞卿, 赵杰, 黄伟. 液体石蜡体系中含铜物种的化学变化[J]. 应用化学, 2013, 30(1): 67-72. (FAN Jin-chuan, YANG Rui-qing, ZHAO Jie, HUANG Wei. Chemical change of copper species in liquid paraffin[J]. Chin J Appl Chem, 2013, 30(1): 67-72.)
    ADAMCZYK A, DLUGON E. The FT-IR studies of gels and thin films of Al2O3-TiO2 and Al2O3-TiO2-SiO2 systems[J]. Spectrochim Acta Part A, 2012, 89: 11-17.
    马金霞, 彭毓秀, 李忠正. 改性微粒硅溶胶的结构和形态[J].中国造纸学报, 2006, 20(2): 139-142. (MA Jin-xia, PENG Yu-xiu, LI Zhong-zheng. Structure of modified silica sol[J]. Trans China Pulp Pap, 2006, 20(2): 139-142.)
    PULIGILLA S, MONDAL P. Co-existence of aluminosilicate and calcium silicate gel characterized through selective dissolution and FT-IR spectral subtraction[J]. Cem Concr Res, 2015, 70: 39-49.
    MA Z L, LI C C, WEI H M, DING D Q. Silica sol-gel anchoring on aluminum pigments surface for corrosion resistance based on aluminum oxidized by hydrogen peroxide[J]. Dyes Pigments, 2015, 114: 253-258.
    CHEN C S, CHENG W H, LIN S S. Study of iron-promoted Cu/SiO2catalyst on high temperature reverse water gas shift reaction[J]. Appl Catal A: Gen, 2004, 257(1): 97-106.
    XIONG W H, PENG J, HU Y F. A non-destructive technique to analyze Si content in evaluation of pore blockageof ferrihydrite-modified diatomite using XANES and BET[J]. Microporous Mesoporous Mater, 2010, 133: 54-58.
    马强, 黄伟, 樊金串, 赵杰, 任杰. 完全液相法制备的 Cu-Zn-Si-Al浆状催化剂一步法合成二甲醚的失活研究[J]. 分子催化, 2009, 23(6): 499-505. (MA Qiang, HUANG Wei, FAN Jin-chuan, ZHAO Jie, REN Jie.Study on the deactivation of Cu-Zn-Si-Al slurry catalyst prepared by complete liquid-phase for one-step dimethyl ether synthesis[J]. J Mol Catal, 2009, 23(6): 499-505.)
    RAMOS F S, FARIAS A M, BORGES L E P, MONTEIRO J L, FRAGA M A, SOUSA A, APPEL L G. Role of dehydration catalyst acid properties on one-step DME synthesis over physical mixtures[J]. Catal Today, 2005, 101(1): 39-44.
    YARIPOUR F, SHARIATINIA Z, SAHEBDELFAR S, IRANDOUKHT A. The effects of synthesis operation conditions on the properties of modified γ-alumina nanocatalysts in methanol dehydration to dimethyl ether using factorial experimental design[J]. Fuel, 2015, 139(1): 40-50.
    NAKAMURA J, NAKAMURA I, UCHIJIMA T, KANAI Y, WATANABE T, SAITO M, FUJITANI T. A surface science investigation of methanol synthesis over a Zn-deposited polycrystalline Cu surface[J]. J Catal, 1996, 160(1): 65-75.
    LU D, ZHU Y, SUN Y. Cu nanoclusters supported on Co nanosheets for selective hydrogenation of CO[J]. Chin J Catal, 2013, 34(11): 1998-2003.
    HU Z M, NAKATSUJI H. Active sites for methanol synthesis on a Zn/Cu(100) catalyst[J]. Chem Phys Lett, 1999, 313(1): 14-18.
  • 加载中

Catalog

    通讯作者: 陈斌, bchen63@163.com
    • 1. 

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索

    Article Metrics

    Article views (420) PDF downloads(473) Cited by()
    Proportional views
    Related

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return