Oxidation of formic acid over palladium catalyst supported on activated carbon derived from polyaniline and modified lignosulfonate composite

JIA Yu-jie; JIANG Jian-chun; SUN Kang; CHEN Chao

Volume 45 Issue 1

Jan. 2017

Turn off MathJax

Article Contents

Article Navigation > Journal of Fuel Chemistry and Technology > 2017 > 45(1): 100-105

JIA Yu-jie, JIANG Jian-chun, SUN Kang, CHEN Chao. Oxidation of formic acid over palladium catalyst supported on activated carbon derived from polyaniline and modified lignosulfonate composite[J]. Journal of Fuel Chemistry and Technology, 2017, 45(1): 100-105.

Citation:

JIA Yu-jie, JIANG Jian-chun, SUN Kang, CHEN Chao. Oxidation of formic acid over palladium catalyst supported on activated carbon derived from polyaniline and modified lignosulfonate composite[J]. Journal of Fuel Chemistry and Technology, 2017, 45(1): 100-105.

Citation:

JIA Yu-jie, JIANG Jian-chun, SUN Kang, CHEN Chao. Oxidation of formic acid over palladium catalyst supported on activated carbon derived from polyaniline and modified lignosulfonate composite[J]. Journal of Fuel Chemistry and Technology, 2017, 45(1): 100-105.

PDF( 2865 KB)

Oxidation of formic acid over palladium catalyst supported on activated carbon derived from polyaniline and modified lignosulfonate composite

Institute of Chemical Industry of Forest Products, CAF; Key Lab of Biomass Energy and Material, Jiangsu Province; National Engineering Lab. for Biomass Chemical Utilization; Key and Open Laboratory of Forest Chemical Engineering, SFA, Nanjing 210042, China

Funds:

projects in Forestry Public Benefit Research Sector 201404610

More Information

Corresponding author: 蒋剑春, Tel:+86-25-85482484, E-mail:bio_energe@126.com
Received Date: 2016-09-09
Rev Recd Date: 2016-10-25

Available Online: 2021-01-23

Publish Date: 2017-01-10

Abstract

Abstract

Activated carbons (AC) were obtained through carbonization of polyaniline and modified lignosulfonate composite (PAn-MLS) under different temperatures; they are characterized by fourier transform infrared spectroscopy (FT-IR), Raman spectroscopy, nitrogen sorption and scanning electron microscope (SEM). With these carbon materials as the support, a series of Pd-AC catalysts for the oxidation of formic acid were prepared by liquid phase reduction and characterized by X-ray diffraction (XRD), transmission electron microscope (TEM) and electrochemical analysis. The results show that with the activated carbon prepared at 800℃ (AC800) as the support, the Pd-AC800 catalyst obtained performs best in the oxidation of formic acid; the palladium particles have an average size of 5.4 nm and the electro-active surface area reaches 53.78 m²/g. As the oxidation of formic acid over Pd-AC800 is realized through direct pathway rather than CO pathway, Pd-AC800 may be considered as a potential electrode material in direct formic acid fuel cells (DFAFC).
- polyaniline,
- modified lignosulfonate,
- activated carbon,
- Pd-AC,
- formic acid,
- oxidation,
- direct formic acid fuel cells

FullText(HTML)

References(31)

References

[1]	REIS A, MERT S. Performance assessment of a direct formic acid fuel cell system through exergy analysis[J]. Int J Hydrogen Energ, 2015, 40: 12776-12783. doi: 10.1016/j.ijhydene.2015.07.131
[1]	刘波, 贺志佳, 金昊.风力发电现状与发展趋势[J].东北电力大学学报, 2016, 36(2):7-13. http://www.cqvip.com/QK/91366A/201305/47803838.html LIU Bo, HE Zhi-jia, JIN Hao. Wind power status and development trends[J]. J Northeast Dianli Univ, 2016, 36(2):7-13. http://www.cqvip.com/QK/91366A/201305/47803838.html
[2]	胡鹏飞, 李勇.地热-太阳能联合有机朗肯循环发电技术研究[J].东北电力大学学报, 2015, 35(5):41-45. http://www.cnki.com.cn/Article/CJFDTotal-DBDL201505009.htm HU Peng-fei, LI Yong. Solar-geothermal hybrid cycle of Organic Rankine Cycle (ORC) analysis in power generation[J]. J Northeast Dianli Univ, 2015, 35(5):41-45. http://www.cnki.com.cn/Article/CJFDTotal-DBDL201505009.htm
[3]	REIS A, MERT S. Performance assessment of a direct formic acid fuel cell system through exergy analysis[J]. Int J Hydrogen Energy, 2015, 40(1):12776-12783. https://www.researchgate.net/publication/281052557_Performance_assessment_of_a_direct_formic_acid_fuel_cell_system_through_exergy_analysis
[4]	贾若琨, 李艺花. Fe₃O₄-Au功能纳米复合材料的制备及催化性能[J].东北电力大学学报, 2016, 36(3):75-79. JIA Ruo-kun, LI Yi-hua. Preparation and catalytic properties of Fe₃O₄-Au functional nanocomposites[J]. J Northeast Dianli Univ, 2016, 36(3):75-79.
[5]	BAHARI A, HEKMATARA H, SEPAHVAND R, ADELI M. Carbon nanotube-graft-poly (citric acid) containing silver and palladium nanoparticles[J]. Nano, 2009, 4(4):217-223. doi: 10.1142/S179329200900168X
[6]	LESIAK B, MAZURKIEWICZ M, MALOLEPSZY A, STOBINSKI L, MIERZWA B, MIKOLAJCZUK-ZYCHORA A, JUCHNIEWICZ K, BORODZINSKI A, ZEMEK J, JIRICEK P. Effect of the Pd/MWCNTs anode catalysts preparation methods on their morphology and activity in a direct formic acid fuel cell[J]. Appl Surf Sci, 2016, 387(1):929-937. https://www.researchgate.net/publication/304577454_Effect_of_the_PdMWCNTs_anode_catalysts_preparation_methods_on_their_morphology_and_activity_in_a_direct_formic_acid_fuel_cell?_sg=L7XwybdX4OQwp_Yh_X7G91sWKtMJsRrgnU8Ooy_DMWnP4qmU8JBPpplbpvlVoeQynZIlfAG4IMoeJmAcMk08sw
[7]	张瑛洁, 吕立杰, 史长东.多孔硅/炭复合电吸附电极材料的研究进展[J].东北电力大学学报, 2015, 35(5):17-22. http://www.sciencedirect.com/science/article/pii/S0013468616303760 ZHANG Ying-jie, LV Li-jie, SHI Chang-dong. Study progress in porous silicon/carbon composite electrode materials of electric adsorption[J]. J Northeast Dianli Univ, 2015, 35(5):17-22. http://www.sciencedirect.com/science/article/pii/S0013468616303760
[8]	GHARIBI H, GOLMOHAMMADI F, KHEIMAND M. Palladium/cobalt coated on multi-walled carbon nanotubes as an electro-catalyst for oxygen reduction reaction in passive direct methanol fuel cells[J]. Fuel Cells, 2013, 13(1):987-1004. doi: 10.1002/fuce.201200220/abstract
[9]	SAWANGPHRUK M, KRITTAYAVATHANANON A, CHINWIPAS N, SRIMUK P, VATANATHAM T, LIMTRAKUL S, FOORD J. Ultraporous palladium supported on graphene-coated carbon fiber paper as a highly active catalyst electrode for the oxidation of methanol[J]. Fuel Cells, 2013, 13(1):881-888. https://www.researchgate.net/publication/264260428_Ultraporous_Palladium_Supported_on_Graphene-Coated_Carbon_Fiber_Paper_as_a_Highly_Active_Catalyst_Electrode_for_the_Oxidation_of_Methanol
[10]	WANG L, ZHANG Y, LOU Y, GUO Y, LU G, GUO Y. Pd catalyst supported on activated carbon honeycomb monolith for CO oxidation and the application in air purification of vehicular tunnel[J]. Fuel Process Technol, 2014, 122(1):23-29. http://or.nsfc.gov.cn/handle/00001903-5/210952
[11]	CHEN T, LI D, JIANG H, XIONG C. High-performance Pd nanoalloy on functionalized activated carbon for the hydrogenation of nitroaromatic compounds[J]. Chem Eng J, 2015, 259(1):161-169. http://www.sciencedirect.com/science/article/pii/S1385894714009449
[12]	NSIB M F, SAAFI S, RAYES A, MOURSSA N, HOUAS A. Enhanced photocatalytic performance of Ni-ZnO/polyaniline composite for the visible-light driven hydrogen generation[J]. J Energy Inst, 2016, 89(4):694-703. doi: 10.1016/j.joei.2015.05.001
[13]	TAKPIRE S R, WAGHULEY S A. Investigating the optical and structural properties of PANi/Ti polymer composites for photovoltaic application[J]. J Energy Inst, 2017, 90(1):44-50. doi: 10.1016/j.joei.2015.11.001
[14]	YUAN D, ZHOU T, ZHOU S, ZOU W, MO S, XIA N. Nitrogen-enriched carbon nanowires from the direct carbonization of polyaniline nanowires and its electrochemical properties[J]. Electrochem Commun, 2011, 13(3):242-246. doi: 10.1016/j.elecom.2010.12.023
[15]	JIA Y, JIANG J, SUN K. Pyrolysis of polyaniline-poly (styrene sulfonate) hydrogels to prepare activated carbons for the adsorption of vitamin B12[J]. J Anal Appl Pyrolysis, 2015, 111(1):247-253. https://www.researchgate.net/publication/268821787_Pyrolysis_of_polyaniline-polystyrene_sulfonate_hydrogels_to_prepare_activated_carbons_for_the_adsorption_of_vitamin_B12
[16]	LV Q, HE Z, ZHANG J, LIN Q. Preparation and properties of nitrogen-containing hollow carbon nanospheres by pyrolysis of polyaniline-lignosulfonate composites[J]. J Anal Appl Pyrolysis, 2011, 92(1):152-157. doi: 10.1016/j.jaap.2011.05.009
[17]	DAI T, JIA Y. Supramolecular hydrogels of polyaniline-poly (styrene sulfonate) prepared in concentrated solutions[J]. Polymer, 2011, 52(12):2550-2558. doi: 10.1016/j.polymer.2011.04.006
[18]	JIA Y, JIANG J, SUN K. Electrocatalytic performance of Pt supported on polyaniline-poly (styrene sulfonate) hydrogel[J]. J Appl Polym Sci, 2012, 125(1):3702-3707. doi: 10.1002/app.36712/abstract?globalMessage=0
[19]	JIA Y, JIANG J, SUN K, DAI T. Enhancement of capacitance performance of activated carbon-Polyaniline composites by introducing methyl orange[J]. Electrochim Acta, 2012, 71(1):213-218. https://www.researchgate.net/publication/256697084_Enhancement_of_capacitance_performance_of_activated_carbon-Polyaniline_composites_by_introducing_methyl_orange
[20]	TAYLOR K K, COLE C V, SOORA R, DILDAY J C, HILL A M, BERRY B, VISWANTHAN T. The use of lignosulfonic acid in the synthesis of water-dispersible polyaniline[J]. J Appl Polym Sci, 2008, 108(1):1496-1500. http://www.academia.edu/7984129/The_use_of_lignosulfonic_acid_in_the_synthesis_of_water-dispersible_polyaniline
[21]	TRCHOVÁ M, KONYUSHENKO E, STEJSKAL J, KOVÁROVÁ J, CIRIC-MARJANOVIC G. The conversion of polyaniline nanotubes to nitrogen-containing carbon nanotubes and their comparison with multi-walled carbon nanotubes[J]. Polym Degrad Stabil, 2009, 94(6):929-938. doi: 10.1016/j.polymdegradstab.2009.03.001
[22]	ROZLIVKOVA Z, TRCHOVA M, EXNEROVA M, STEJSKAL J. The carbonization of granular polyaniline to produce nitrogen-containing carbon[J]. Synth Met, 2011, 161(11/12):1122-1129. https://www.researchgate.net/publication/238502365_The_carbonization_of_granular_polyaniline_to_produce_nitrogen-containing_carbon
[23]	曹剑瑜, 汤佳丽, 宋玲政, 许娟, 王文昌, 陈智栋. EDTA对活性炭的功能化处理及其对炭载Pd催化剂电催化性能的影响[J].物理化学学报, 2013, 29(1):144-150. http://www.whxb.pku.edu.cn/EN/abstract/abstract28248.shtml CAO Jian-yu, TANG Jia-li, SONG Ling-zheng, XU Juan, WANG Wen-chang, CHEN Zhi-dong. Functionalization of activated carbon with EDTA and its effect on electrocatalytic performance of carbon supported Pd catalysts[J]. Acta Phys-Chim Sin, 2013, 29(1):144-150. http://www.whxb.pku.edu.cn/EN/abstract/abstract28248.shtml
[24]	WANG K, ZHAO J, LI H, ZHANG X, SHI H. Removal of cadmium (Ⅱ) from aqueous solution by granular activated carbon supported magnesium hydroxide[J].[QX (Y12#]J Taiwan Inst Chem Eng, 2016, 61(1):287-291.
[25]	HUANG X, JIA K, LIU X. Nano titanium dioxide/multi-walled carbon nanotube heterostructure containing single one carbon nanotube and its electromagnetic properties[J]. Nano, 2015, 10(7):20151550102-1-1550102-7. doi: 10.1142/S1793292015501027
[26]	WANG H, KONG W, ZHU W, WANG L, YANG S, LIU F. One-step synthesis of Pd nanoparticles functionalized crystalline nanoporous CeO₂ and their application for solvent-free and aerobic oxidation of alcohols[J]. Catal Commun, 2014, 50(1):87-91. https://www.researchgate.net/publication/260800091_One-step_synthesis_of_Pd_nanoparticles_functionalized_crystalline_nanoporous_CeO2_and_their_application_for_solvent-free_and_aerobic_oxidation_of_alcohols
[27]	LIU B, ZHENG L, LIAO S, ZENG J. Volume production of high loading Pt/C catalyst with high performance via a microwave-assisted organic colloid route[J]. J Power Sources, 2012, 210(1):54-59. http://adsabs.harvard.edu/abs/2012JPS...210...54L
[28]	HA S, LARSEN R, ZHU Y, MASEL R. Direct formic acid fuel cells with 600mA·cm^-2 at 0.4V and 22℃[J]. Fuel Cells, 2004, 4(1):337-343.
[29]	HA S, LAREN R, MASEL R. Performance characterization of Pd/C nanocatalyst for direct formic acid fuel cells[J]. J Power Sources, 2005, 144(1):28-34. doi: 10.1016/j.jpowsour.2004.12.031
[30]	FATHIRAD F, AFZALI D, MOSTAFAVI A. Bimetallic Pd-Zn nanoalloys supported on Vulcan XC-72R carbon as anode catalysts for oxidation process in formic acid fuel cell[J]. Int J Hydrogen Energy, 2016, 41(30):13220-13226. doi: 10.1016/j.ijhydene.2016.05.098